Page 24

PII Oct-Nov 2013

4 WEG to supply six custom-made squirrelcage motors for driving plunger pumps on offshore oil production ships in Brazil Wepuko PAHNKE GmbH (Wepuko), a specialist in high-pressure pumps and compressors which is headquartered in Metzingen, Germany, relies on drive solutions from WEG. Electric motor manufacturer WEG is supplying a total of six squirrel-cage motors from the Master Line series to drive triple-plunger highpressure hydraulic pumps. According to Fabio Viviani, Project Manager at WEG Germany, the MGF 560 models for this application are special products rated at 1,203 kW and will drive pumps on the P66 to P71 floating production storage and offloading (FPSO) ships of the Brazilian oil producer Petrobras. The explosion-proof six-pole squirrel-cage motors (type MGF 560 A, rated at 1,230 kW, 13.8 kV, 60 Hz, IP 56 W) operate reliably and securely at all times even under the extreme conditions of offshore oil production in pre-salt deep-sea oil fields. Long-time business partner Wepuko bid directly for this highprofile project with WEG motors. The first two MGF 560 motors are scheduled for delivery to Metzingen later this year, with the remaining four to follow in in 2014. Offshore applications in the oil and gas sector are generally regarded as one of the most severe application areas for high-power electric motors. Oil production in deep-sea fields off the Brazilian coast is especially demanding because the oil is not only located over 1,000 metres below sea level, but also covered by a salt layer up to 2,000 metres thick. WEG has specifically adapted the MGF 560 motors DART1 Wireless Machinery Monitoring System (ATEX Zone 1 Certified) As part of our commitment to continually reduce the cost of clients’ condition monitoring and improve safety in collecting data from hazardous or inaccessible areas, John Crane has developed an advanced technology, intrinsically safe wireless machinery monitoring system. Specifically designed for condition monitoring of rotating machinery in hazardous areas (ATEX Zone1), the system is battery powered, designed to be easily installed and virtually maintenance free. • Fit in a day • Easily moved from skid to skid for bad actor RCA • Up to 16,000 point data spectrum • Real time and long time trending graphs • Monitor in hazardous areas • Monitor in inaccessible areas • Monitor infrequently run equipment with “wake up” feature • Dashboard GUI with alarm function • Can run on standard PC • Free issued software and no annual charges • 3 to 8 year battery life www.johncrane.com John Crane UK Ltd Nash Road, Trafford Park, Manchester, M17 1SS 24hr Emergency: 0800 917 2408 Colin Ure T: 07786 727997 John Crane UK Ltd Aberdeen Oil and Gas Support Unit, Asset Management Solutions, Grampian House, Mugimoss Road, Bucksburn, Aberdeen, AB21 9NP Rod Mackenzie T: 07917 227825 for use on Petrobras’s P66 to P71 FPSOs operating in that region. The units are explosionproof 16617 BPMA 112x150mm Ad_AW 2.indd 1 28/01/2013 16:52 for Zone 2 (group IIA, thermal class T3) and designed for an ambient temperature range of -45 to +45°C. The starting current is limited to six times the rated current. Due to the aggressive ambient conditions, the heat exchangers, fasteners and motor fans are made from stainless steel to provide enhanced corrosion resistance. The motor windings are protected against voltage surges by capacitors and integrated surge protectors. The motors are certified by INMETRO for use in explosion hazard areas and by BV Bureau Veritas for shipboard use. The motors operate reliably and with guaranteed efficiency even under extremely harsh conditions. According to Andreas Schulte Mesum, Director Energy Business at WEG Germany, Petrobras chose the Wepuko solution with WEG motors not just for technical reasons: “We have already executed several projects successfully for Petrobras. As a result, we are very familiar with the customer and the specific requirements of offshore oil production. We specifically adapted our MGF motors for this especially demanding project - you could almost call them ‘handmade’. Another small plus was unquestionably the fact that we could supply the complete documentation in Brazilian Portuguese. We are especially pleased to be able to carry out this exciting project together with an experienced partner like Wepuko.” The motors in the Master (M) Line were developed in response to the needs of the global oil and gas industry. They provide high performance, reliability and security under the harshest operating conditions on land and in the offshore sector. They also combine many years of experience with a broad application range and all classifications for explosion hazard areas in accordance with the ATEX directive. M-Line motors are used worldwide in a wide variety of applications, including water injection, multi-stage gas compression and oil pipeline operation, and they are WEG’s core product for the oil and gas market. With rated power up to 30 MW, these induction motors are designed for relatively large applications and can be built as squirrel-cage or slip-ring rotors. The housing is made from grey cast iron for frame sizes from 280 to 560, while fully welded housings are used for frame sizes from 630 to 1800. The motors are available with operating voltages from 2.3 kV to 13.8 kV in 50-Hz and 60-Hz versions, with 2, 4, 6, 8, 10 or 12 poles. Standard cooling is provided by an air/air heat exchanger; other cooling types (e.g. air/water heat exchanger) are available as options. For more information contact WEG Electric Motors (UK) Ltd, Redditch, Worcestershire. Tel: +44(0)1527 513800 Fax: +44(0)1527 513810 E-mail: wegsales@wegelectricmotors.co.uk Web: www.weg.net E-mail: hannah@touchwavemedia.co.uk


PII Oct-Nov 2013
To see the actual publication please follow the link above